loading
reading
writing
saving
searching
Electrical Prysmian cable Wire MV105 2 AWG 15KV/133 percent, 606ft - $3,636 (Belding)
6800 Lessiter Rd NE
condition:
new
QR Code Link to This Post
selling $6 a foot
Electrical Prysmian cable, MV105 15KV/133 percent, 606ft length, 438 gross weight
APPLICATION
• 2 AWG Shielded MV-105 cable is primarily used for power circuits in commercial, industrial, refinery and petro-chemical plants; utility power generation and substations. The cable can be installed in wet or dry applications and is for use in aerial, conduit, open tray, and underground duct installations. It can be used in direct burial if installed with a ground conductor in close proximity. The cable is approved for temperatures up to 105°C and voltages up to 5000 volts in ungrounded applications and 8000 volts for grounded applications.
CONDUCTOR
• Class B Compressed Annealed Uncoated Copper
CONDUCTOR SHIELD
• Extruded layer of semiconducting compound applied under simultaneous triple extrusion process.
INSULATION
• Extruded layer of 105°C rated Ethylene Propylene Rubber (EPR)
INSULATION SHIELD
• Extruded layer of semiconducting compound applied by triple extrusion process
METALLIC SHIELD
• 5 mil bare copper tape applied helically with a 25% overlap
JACKET
• Extruded layer of black sunlight resistant Polyvinyl Chloride (PVC)
STANDARDS
• UL 1072
• ASTM B-496
• ICEA S-93-639
• ICEA S-97-682
• AEIC CS8-2000
• IEEE 383
• OSHA Acceptable
• UL Listed as Type MV-105 for use in accordance with NEC
PRODUCT SPECIFICATIONS
Size AWG 2
Insulation Thickness (inches) 0.115
Jacket Thickness (inches) 0.060
Outside Diameter (inches) 0.760
Weight (Lbs/1000ft) 475